Heatmiser central heating controls
Zone-by-zone control for radiator systems, hot water on its own timer, and one app for the whole house, including any underfloor heating. Fitted across Belfast and Greater Belfast.
Control that matches how your house is zoned
A thermostat for each zone
Wired neoStat or wireless neoAir thermostats, so upstairs and downstairs, or the house and the extension, each run to their own schedule.
Hot water on its own timer
If you have a hot water tank, it can be scheduled separately from the heating with the right Heatmiser controller.
One app for everything
A neoHub on your router puts every zone in the Heatmiser app, so you can change any of it from your phone.
Underfloor and radiators together
Underfloor heating downstairs and radiators upstairs can run in the same Heatmiser system, side by side in one app.
Heatmiser is a good fit if you…
- Have more than one heating zone, such as upstairs and downstairs, or an extension
- Have underfloor heating in part of the house and radiators in the rest
- Already have Heatmiser thermostats and want them set up properly or connected to an app
- Are building or renovating and want zoned controls planned in from the start
- Run premises where different areas need different schedules
One zone and a combi boiler?
Heatmiser isn’t always the answer. For a straightforward single-zone home, a Hive, Nest or tado° smart thermostat is often simpler, and we fit those too. We’ll recommend whichever suits your house.
Three steps to zoned heating that works
Free survey
We check your boiler, wiring and Wi-Fi, ask how you live, and recommend the system that suits your home, and exactly which kit to buy.
Fit & set up
Neat, tidy installation, usually in a single visit. We connect everything to the app and set your schedules with you.
We show you how
A proper walkthrough on your own phone before we leave, and we’re a call away if anything needs tweaking later.
What does it cost?
It depends on how many zones you have, wired or wireless thermostats, and whether you want hot water and app control. The survey is free and you get a clear quote for the fitting before any work starts. We don’t sell the equipment; we tell you exactly what to buy.
One system, one app
See our guide to thermostats for underfloor heating, or everything we do with Heatmiser.
Heatmiser central heating questions
Can Heatmiser control radiators as well as underfloor heating?
Yes. Heatmiser thermostats control radiator zones too, so a home with underfloor heating downstairs and radiators upstairs can have one system and one app.
What is a heating zone?
An area of the house the heating can switch on and off separately, such as upstairs and downstairs. Each zone needs its own thermostat to have its own schedule. We check how your system is zoned on the survey.
I already have Heatmiser. Can I get app control?
If you have Neo thermostats, adding a neoHub usually puts them in the app. Older models may need replacing with Neo thermostats first. We’ll check what you have.
Is Heatmiser better than Hive or tado° for radiators?
It depends on the house. For a simple single-zone home with a combi boiler, Hive or tado° is often simpler. Heatmiser comes into its own with several zones, underfloor heating, or an existing Heatmiser setup.
Let’s get your heating sorted
Tell us a little about your property and we’ll get back to you within 24 hours.